Before the Guests Arrive: A Holiday HVAC Maintenance Checklist

You’ve made room at the table, put fresh sheets on the guest bed, and planned what’s going in the oven. Before the doorbell rings, give your heating and cooling system a quick check, too. A few simple steps can help keep air moving and make your home more comfortable when everyone’s inside.

1. Check your HVAC filter

Take a look at your filter before guests arrive. If it’s visibly dirty or due for replacement, swap it for a clean one that matches your system’s size and filter specifications. If your system uses a washable filter, follow the manufacturer’s cleaning instructions. A clogged filter can restrict airflow, so make a habit of checking it regularly throughout the heating season, especially if you have pets. 

2. Keep supply registers and return grilles clear

That extra chair or stack of gifts could be sitting right over a floor register. Check the rooms where guests will gather or sleep and move furniture, rugs, and decorations away from supply registers, where air enters the room, and return grilles, where air flows back to the system. Use a vacuum brush attachment to remove loose dust from the grilles. 

3. Give the heat a test run

Turn on the heat a few days before your gathering and check that the rooms you’ll use are warming up, including the guest room you usually keep closed. Review your thermostat schedule, especially if it’s set to lower the temperature when you’re normally out. If the system struggles to reach the set temperature or you’re overdue for annual heating maintenance, contact a qualified HVAC service technician. 

4. Use the kitchen exhaust fan while you cook

Holiday cooking can send smoke and fine particles into the air. If your range hood vents outdoors, run it while you cook and leave it on for 10 to 20 minutes afterward. Use the back burners when you can so the hood can capture more of what rises from the stove.

5. Know when it’s time for an HVAC system inspection

If you see debris blowing from supply registers, signs of pests in the ductwork, or suspected microbial growth inside the system, ask a qualified professional to inspect it. An inspection can help determine whether cleaning is needed and identify problems, such as a moisture source, that need to be addressed.

If cleaning is recommended, ask for a written scope that covers the work to be performed. Ask how the contractor will verify that the components are clean after the work is done and whether the work will follow ACR, The NADCA Standard for Assessment, Cleaning, and Restoration of HVAC Systems. 

Start with the filter, walk through the rooms your guests will use, and give the heat a test run before the house fills up. If you spot signs that your system needs a closer look, find a qualified professional near you using our Find A Pro tool.